Is your pool pump not working? Do you have no idea where to begin to fix it?
If you own a swimming pool, you have to have a functioning pool pump. The pump operates all the machinery involved in your pool. It’s responsible for moving water through the filter, circulating cleaning chemicals, and heating the pool when needed.
Without a functioning pump, your pool will quickly fall apart. The average pump should last anywhere from five to ten years before needing replacement.
In this article, we’ll go into some common reasons your pump may stop working and how to fix it.
Keep reading to get all the pool pump not working solutions.
Check the Power Source
If your pool pump is not working, one of the first things you should check is the power source. Make sure the pump is plugged in and that the circuit breaker is not tripped.
If the pump is hardwired, check the fuse box or circuit breaker panel to see if the breaker has tripped. If it has, simply reset it and see if the pump turns on. If the pump still does not work, you may need to replace the fuse.
Check the Strainer Basket
If the pump is getting power, the next step is to check the strainer basket and make sure it is not full of debris. This basket is typically located at the base of the pump and catches debris that can clog the pump, which prevents the pump from working.
If the basket is clogged, clean it out and try again. When the basket is clean, and the pump still isn’t working, you may need to replace the pump.
Check the Impeller
If the pump is getting power, the next step is to check the impeller. The impeller is the part of the pump that moves water. If the impeller is frozen or clogged, the pump will not work.
When the pump still does not work, you may need to replace the impeller. To do this, you will need to remove the pump from the pool and disassemble it. Once you have replaced the impeller, you should be able to reassemble the pump and get it working again.
Check the Wear Ring and Seals
If the impeller is fine, the next step is to check the worn ring and the seals and make sure it is not damaged. The wear ring is a plastic or metal ring that is located between the impeller and the volute of the pump.
It seals the gap between the impeller and the volute and prevents water from bypassing the impeller. The seals are located between the wear ring and the impeller and prevent water from leaking out of the pump.
If they are damaged, replace them. If you can’t find the issue, you may need to call a pool repair technician. You can check out https://aquapremierpools.com.
Pool Pump Not Working: Follow These Tips
Are you having a hard time with your swimming pool maintenance and your pool pump not working properly? By following the tips in this article, you can start troubleshooting the issues.
If there are no obvious issues, you should then contact a pool technician to come and take a look. In the meantime, you should not use the pool until the pump is fixed.
Did this article help? Be sure to take a look at more of our blog posts for more helpful guides and home advice.
